Heat loss through your walls accounts for 35% of the total heat loss in a home.

Bonded Bead

Cavity wall insulation is a cost effective method of reducing this heat loss. Our bead is the best performing bead on the market. Always check the installers certification for proof of what product they are using.

• Instantly makes for a warmer home
• Reduces draughts
• Most jobs done in 1 day
• Walls with existing white insulation can also be upgraded
• Holes patched with coloured plaster to match existing

Wall Insulation

22mm holes (about the size of a €1 coin) are drilled in the external wall. Bead insulation is then pumped into the cavity. The bead is coated with an adhesive. This bonding agent allows the bead to flow freely until the cavity is completely filled. The adhesive then sets to prevent any sinking, settling or cracking.We can fill walls where there is no insulation or where some insulation already exists. The holes are then repaired with coloured plaster, or paint if available.

Material used

We use KOREfill bead which is certified at 0.033Wmk. i.e 0.27 U-value in a 110mm cavity. The product is fully tested & approved by the NSAI. Click here to view certification. KOREfill cert

The unique draining qualities of  KOREfill bonded bead allows the cavity to drain, breathe and remain dry.

 Results

Installing cavity wall insulation will greatly improve the warmth of your home and save on your heating bill. The insulation will lower the rate at which heat is lost through your walls so the house will also hold the heat for longer.

Call us on 045-847988 for more information or to book a free survey