Cavity wall insulation
Heat loss through your walls accounts for 35% of the total heat loss in a home. Cavity wall insulation is a cost effective method of reducing this heat loss.
New Super silver cert
Wall insulation
22mm holes (about the size of a €1 coin) are drilled in the external wall. Bead insulation is then pumped into the cavity. The bead is coated with an adhesive. This bonding agent allows the bead to flow freely until the cavity is completely filled. The adhesive then sets to prevent any sinking, settling or cracking.
We can fill walls where there is no insulation or where some insulation already exists. The holes are then repaired with coloured plaster, or paint if available.
Material used
We use Warmfill super silver bead insulation. Warmfills bead is certified at 0.031Wmk i.e 0.25 U-value in a 110mm cavity. This is the lowest certified U-value of any bead on the market. The unique draining qualities of warmfills super silver bonded bead allows the cavity to drain, breathe and remain dry.
To see a quick presentation of the warmfill system please click here
Warmfill Presentation
Results
Installing cavity wall insulation will greatly improve the warmth of your home and save on your heating bill. The insulation will lower the rate at which heat is lost through your walls so the house will also hold the heat for longer.
Contact Us
Greenoak Energy Solutions
Timahoe
Donadea
Naas
Co. Kildare
045 847988
09/03/2010
New Silver bead launched.
Suppliers and Trade Associations
